Launching DMIx SamplR App

	Launching DMIx SamplR App
1	The first time you open the SamplR app, you’ll be asked if the app can detect Bluetooth devices in your near area. A Bluetooth connection is required to use SamplR, so you’ll need to tap “Allow” here. If you accidentally tapped “Don’t allow,” you can change this in your iOS settings. Troubleshooting
2	Log in using your DMIx credentials.
3	Navigate to the settings page (wrench symbol) to find and connect to your device.
4	Click on the “Connect” Button to scan for nearby SamplR devices.
5	Select your DMIx SamplR. If you have multiple SamplR devices, you can identify each one by its serial number (S/N: xxxxxx). The serial number for each device is located on the sticker on the back of the device. If no devices are listed try to refresh the list by sliding from top to bottom in the pop over menu.
6	Once you've connected to your SamplR, the app will ask for permission to access your iPhone's camera. Access to the camera is essential for the SamplR to function, so you must click "Allow" here. If you clicked "Don't Allow," you can grant camera access in the iOS Settings.
7	Once you connected to a device, press the red “eye” button to start the “identification” mode. This will toggle all light sources sequentially and helps you with identification and function control.
8	Please proceed with Calibrating DMIx SamplR